TRIAD PAINT AND CHEMICAL CORP -- STAIN -- 8010-00-281-2074
===================== Product Identification =====================
Product ID:STAIN
MSDS Date:01/01/1987
FSC:8010
NIIN:00-281-2074
=== Responsible Party ===
Company Name:TRIAD PAINT AND CHEMICAL CORP
Address:810 EVERGREEN AVENUE
City:BROOKLYN
State:NY
ZIP:11207
Country:US
Info Phone Num:(718) 443-2778
Emergency Phone Num:(718) 443-2778
CAGE:33151
=== Contractor Identification ===
Company Name:STEVEN INDUSTRIES
Address:39 AVENUE C
Box:8
City:BAYONNE
State:NJ
ZIP:07002-3417
Country:US
Phone:201-437-6501
CAGE:33150
Company Name:TRIAD PAINT AND CHEMICAL CORP
Address:810 EVERGREEN AVE
Box:City:BROOKLYN
State:NY
ZIP:11207-1140
Country:US
CAGE:33151
============= Composition/Information on Ingredients =============
Ingred Name:MINERAL SPIRITS
CAS:64741-41-9
Fraction by Wt: 62.4%
ACGIH TLV:100 PPM
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:EYES: MAY CAUSE IRRITATION.
SKIN: MAY CAUSE DEFATTING.
INHALATION: MAY CAUSE
IRRITATION TO NOS E AND THROAT. REPEATED EXCESSIVE EXPO-SURE MAY
RESULT IN HEADACHE, DIZZINESS, SLEEPINESS, AND NAUSEA.
======================= First Aid Measures =======================
First Aid:INHALATION: PROVIDE FRESH AIR AND REST.
SKIN: WASH WITH MILD SOAP AND WATER. USE
EMOLLIENT CREAM OR LOTION. EYES: WASH WITH A GENTLE
STREAM OF WATE R FOR 10 MINUTES. SEE A DOCTOR.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:105F/41C
Lower Limits:6.0
Upper Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS. WATER STREAM WILL SPREAD OIL FIRES.
Unusual Fire/Explosion Hazard:KEEP WORK AREAS FREE OF HOT METAL
SURFACES AND OTHER SOURCES OF IGNITION. VAPOR FORMS EXPLOSIVE
MIXTURE BETWEEN UPPER AND LOWER EXPLOSIVE UNITS.
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID FLAME AND SPARK SOURCES. PROVIDE
ADEQUATE VENTILATION. WIPE UP SPILL WITH INERT ABSORBENTS AND
NON-SPARKING TOOLS. SAFELY DISCARD SATURATED ABSORBENTS. AVOID
PROLONGED BREATHING OF VAPORS WHILE CLEANING UP SPILL.
====================== Handling and Storage ======================
Handling and Storage Precautions:AVOID OPEN FLAME AND SPARK SOURCES.
PROVIDE ADEQUATE VENTILATION. AVOID EXCESSIVE HEAT.
Other Precautions:DO NOT TAKE INTERNALLY. AVOID PROLONGED OR REPEATED
CONTACT WITH SKIN. AVOID PROLONGED OR REPEATED BREATHING OF
VAPOR.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:ORGANIC CANNISTER MASK OR AIR PACK IF
VENTILATION IS INADEQUATE.
Ventilation:MECHANICAL GENERAL WITH APPROVED CLASS D EXPLOSION PROOF
MOTOR AND SWITCHES.
Protective Gloves:NEOPRENE RUBBER GLOVES
Eye Protection:CHEMICAL SAFETY GOGGLES
Supplemental Safety and Health
NK
================== Physical/Chemical Properties ==================
HCC:F4
Vapor Pres:1@100F
Vapor Density:5.0
Evaporation Rate & Reference:.13
Solubility in Water:NEG.
Appearance and Odor:LIGHT WALNUT HYDROCARBON ODOR
Percent Volatiles by Volume:72
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, CO2, ACRID FUMES AND SMOKE WHEN
COMBUSTED.
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSAL PROCEDURES MUST COMPLY WITH LOCAL,
STATE,AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.